KK 254 C
Continuous cutters
Vacuum continuous cutter with a 250 mm plate and a capacity of 5–15 t/h according to the manufacturer’s technical sheet, for operation with or without vacuum.
Model overview
- Capacity
- 5–15 t/h
- Plate diameter
- 250 mm
- Cutting set
- Contact-free, 3 / 5 / 7 parts
- Drive and power options
- AC-6: 140 kW; AC-6 V: 200 kW (according to the technical sheet)
- Hopper capacity — options
- 220 / 550 / 900 L
About the model
KK 254 C cuts and emulsifies mixtures with a contact-free 3-, 5- or 7-part cutting set. In vacuum mode, air is extracted directly in the cutting set, and the vacuum level is adjusted through the controls. Compared with KK 144 C, it has a larger plate, higher stated capacity and larger hopper options. An integrated vacuum pump and enclosed stainless steel frame form part of the construction described in the technical sheet.
Technical sheet data
Technical specifications
- Plate diameter
- 250 mm
- Capacity
- 5–15 t/h
- Cutting set
- Contact-free, 3 / 5 / 7 parts
- Drive and power options
- AC-6: 140 kW; AC-6 V: 200 kW (according to the technical sheet)
- Hopper capacity — options
- 220 / 550 / 900 L
- Vacuum system
- In the cutting set; integrated vacuum pump
- Operating modes
- With or without vacuum
- Construction
- Enclosed stainless steel frame
The attached KK 254 C manufacturer’s sheet lists AC-6 and AC-6 V drives; the current model overview on the manufacturer’s website lists AC-6. Availability of the 200 kW drive and selected hopper capacity should therefore be confirmed in the quotation. Capacity depends on the product and configuration.
Application
For continuous emulsifying of larger quantities of pre-ground mixtures and sausage fillings. Vacuum in the cutting set distinguishes this model from the non-vacuum KK 250. For feeding by a controlled pump and vacuum at three points, see KK 254 TV; these versions are more than different sizes of the same machine.